Select Page

Downsizing Your Technique with Higher Power Chains
HK type roller chains conform to H type of ANSI, and their thickness of inner and outer link plates are equal to people of your next bigger dimension chain. Hence, HK kind roller chains are higher in tensile strength by about 20%and in greatest allowable load by about 15% than these of conventional roller chains. Because the excess weight of the chains can be bigger, HK type roller chains are ideal for the application of heavy duty at low speed.
Proposed employs
?Optimal for areas the place greater power is required but substantial and heavier chains cannot be employed.
Selection of chains
Select a good HK kind roller chain according to “Low-speed selection”
To the optimum allowable load, see the next table of dimensions.
HK form roller chains can be found as much as triplex.
Sprockets
Use standard sprockets for a simplex HK roller chain Because the transverse pitches are greater than people of regular chains during the case of duplex or triplex, typical sprockets can’t be utilised. Refer to your sprocket tooth profiles for HK
Connecting link and offset website link
The tensile strength of connecting hyperlinks and offset hyperlinks are listed around the left, but the maximum allowable load is decrease than that of the base chain. Please check with us ought to you have got any concerns. It’s advised to make use of the connecting website link of interference-fitted (FJ, HJ)
By no means make the holes of your connecting plate greater and in no way make the pins thinner to facilitate the function for fitting the pins in to the connecting plate, given that otherwise the fatigue strength is going to be lowered.
Collection of chains
Choose a appropriate HK type roller chain dependant on “Low-speed selection”
For your greatest allowable load, see the following table of dimensions.
HK sort roller chains are available up to triplex.
Sprockets
Use standard sprockets for a simplex HK roller chain Because the transverse pitches are bigger than these of regular chains while in the situation of duplex or triplex, conventional sprockets can not be made use of. Refer to your sprocket tooth profiles for HK
Connecting website link and offset link
The tensile strength of connecting hyperlinks and offset back links are listed over the left, but the optimum allowable load is lower than that with the base chain. Please consult us must you may have any questions. It is proposed to utilize the connecting hyperlink of interference-fitted (FJ, HJ)
Under no circumstances make the holes on the connecting plate greater and in no way make the pins thinner to facilitate the function for fitting the pins in to the connecting plate, since otherwise the fatigue strength will probably be lowered.