Select Page

Standard Description
Consisting of the stress balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is built to operate materials managing equipment. The decreasing motion is achived from the solenoid valve using the decreasing speed controlled by an adjustable needle valve. The left and suitable functions are equipped that has a dual pilot operated examine valve and cross-over relief valves.
Remark: Please seek advice from our sales engineer for that unique pump displacement, motor energy or tank capacity.
Distinctive Notes
1. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
2. Clean all of the hydraulic elements concerned ahead of set up of the power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which really should also be clean and cost-free of impurities.N46 hydraulic oil is suggested.
4. This electrical power unit ought to be mounted horizontal.
five. Check the oil level within the tank just after the first start of the power unit.
six. Oil shifting is needed right after the first a hundred operation hrs, afterwards once every 3000 hrs.