Select Page

TF Sort Flanges
Model TF flanges are produced from the same high-strength cast iron because the S flanges, but are made to accommodate the worldwide typical Taper Lock bushing for uncomplicated set up and removal
TF Sort flanges permit for mounting the bushing over the front (hub) side on the flange
TF flanges can be found in sizes 6 by way of sixteen and will be used with any type of sleeve as pictured on webpage SF-5
TR Variety Flanges
TR flanges are comparable to your TF style, but permit for that Taper Lock Bushing to become mounted and eliminated from
the reverse or serration side in the flange
The restricted torque ratings of the Taper Lock Bushings enable TR flanges to only be applied with EPDM or Neoprene sleeves
Diverse bushing sizes are made use of, so they’ve got distinct greatest bores than the TF flanges
Sizes 6 through 16 can be found
Taper-Lock Bushings
The field regular taper lock bushing is a split style enabling a compression match of the flange to the shaft devoid of set screws
The easy style tends to make the installation and elimination easy while the 8° taper grips tight and provides excellent concentricity
A Lowered degree of stock could be attained on account of the numerous other power transmission components that use Taper Lock Bushings which include: sheaves, sprockets, and pulleys
will not present the Taper-Lock Bushings themselves as they are widely out there from other manufacturers