We – EPG Group the bigge EPT Chain and agricultural gearbox manufacturing unit in China with 5 various branches. For more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

C&Z Purlin Roll Forming Machine

(1)The main technological parameter
1.Rolling merchandise specification:width 100mm~300mm,substantial 40mm~80mm,thickness2.0mm~3.0mm
two.The pace of rolling:twelve-fifteen m/min
3.Quantity of sets of molding:17 sets major roller
4.Variety of sets of leveling: 7 sets leveling roller
5.Change line:2 sets
six.Installation form:Undertake arch sort
7.Roller sort: use break up sort
8.Roll material: GCr15 quenching therapy, HRC58-62
9.Spindle content: forty five high quality steel quenched and tempered
10.main motor electricity:15KW
11. EPT station motor electricity:7.5KW
twelve.Alter the specs velocity: a full established of ten minutes
thirteen.The method of Chopping and punching:Following forming then punching and finally reducing
14.The substance of reducing knife and punching mould:Cr12 quenching treatment.
15.Digital management program:The whole device use  industrial pc PLC Siemens frequency conversion to handle.
sixteen.Main equipment measurement:length 11m×width 2.3m×high 1.6m (such as primary motor)
17.Overall weight of equipment:All around 12000kg
(2)Composition of tools:
1.Xihu (We EPT Lake) Dis.
To avoid the plate go in creation approach to maintain the merchandise good quality.
two.leveling equipment
The leveling equipment is compose of plate content guiding system,information plate driving roller, adjustable guidebook gadget on equally sides, leveling roller and and so on.
The leveling equipment have a different motor push and the speed is slower than principal drive motor. In the head of the reducer shaft put in overrunning clutch.Firstly the  motor drive feeding material,then workpieces into principal drive roller, and because of to the impact of the overrunning clutch, the entrance drive motor is in a passive point out.
Thanks to the major diver motor’s speed is more rapidly than entrance push motor,when plate material cutting down,in between the workpieces will have a distance.
When a batch of workpieces are end, the metal coil requirements to be get rid of,and the entrance push motor will be cease.When all the complete workpieces are fully out of the roll forming machine, the entrance push motor will inverse motion and  exit the steel coil.
3. EPT punching unit: 
composition sort: EPT punching gadget rack is use gantry kind. The electrical power supply is the pressure of underneath oil cylinder:The gap situation is longitudinally fixed and can be adjusted transversely.
 Main parameter:

• Maximum punching plate thickness:3mm
• The horizontal adjustment selection of punching gap distance :45~500mm

four. EPT chopping gadget: 
Purpose:Right after enter the size parameter of workpiece by way of PLC,the encoder will counting duration and when the workpiece duration is sufficient the hydraulic chopping machine will lower down the workpiece.
Major parameter:

1. Highest cutting plate thickness:3mm
2. Efficient chopping width of workpiece:650mm

five.Roll forming machine able of rapidly modifying variety:
The roll forming machine is compose of push motor, body, forming roller,Handbook regulating workpieces technical specs system.

1. forming roller driving motor utilizing 15kw hardened gears reducer ,frequency handle and encoder management brake.
2. The frame utilizes the channel steel as the main beam,and the middle is welded by the stiffener plate.
3. The forming roller is use the technique of two sides fashioned and the form of middle reduce off. The forming roller via the motor driven sliding screw rod to adju EPT the workpieces requirements. Among the two sliding screw rod use the bevel equipment to travel and produced them to obtain comprehensive synchronization also with self-locking purpose. The thickness of the metal plate is adjusted by altering the eccentricity length of the passive roller.

(3)Gear creation procedure
feeding  –  guiding  –   leveling –     punching –     reducing  – forming –  tropsch feed

FAQ
one)Q:Can you make machine in accordance to my layout?
   A:Sure, we have skilled specialized staff to function out the suited design and style for you and verify with you right up until you agree.
two) Q: Will you produce the proper goods as purchased? How can I tru EPT you?
    A: Of course, we will. The core of our business lifestyle is honesty and credit score.
three)Q:What payment phrases you accept?
    A:Typically is TT, 30% deposit and 70% before cargo, and sometimes we can consider much more for you as per your request.
4) Q:What is the warranty for our equipment?
    A:We have one year assure, and give whole life’s technological assistance.

The use of authentic products manufacturer’s (OEM) part numbers or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our company and the outlined alternative elements contained herein are not sponsored, approved, or created by the OEM.