Materials Dealing with Energy UNIT two
General Description
This power unit capabilities energy up gravity down circuit. Activate the start out solenoid to start the motor to lift the machine. The lowing movement is activated from the solenoid valve with all the lowering pace managed through the strain compensated flow manage valve. Items of this series could be extensively used in the industry of logistic gadgets which include fork lift, mini lift table, etc.
Special Notes
1. The duty of this energy unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean the many hydraulic parts concerned in advance of mounting the electrical power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst,which really should also be clean and totally free of impurities, N46 hydraulic oil is advised .
four. Oil shifting is required soon after the initial 100 operation hrs,afterwards after just about every 3000 hrs.
five. The energy unit need to be mounted horizontally.

Material Managing Power UNIT one
Common Description
This electrical power unit is created for that fork lift sector, consisting of remarkably productive gear pump, DC motor, guide raise and reduce valve, tank, ect. The up and down motion are managed through the lever of your manual release valve, that is outfitted with an electrical switch to activate the motor. The lowing pace is managed by the pressure compensated flow handle valve.
Specific Notes
one. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean each of the hydraulic elements concerned in advance of installation of the energy unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst, which need to also be clean and free of charge of impurities, N46 hydraulic oil is proposed .
4. Oil changing is required soon after the preliminary a hundred operation hrs, afterwards when every single 3000 hrs.
five. The energy unit shown is made to be mounted horizontally.